RNID supported by Connevans Limited
RNID supported by Connevans Limited
Noise at work legislation is now becoming a serious consideration for employers and employees with the First Action Level now set at 80dB in Europe. It is therefore essential that employers take the necessary actions to protect their staff and keep them within the stated sound level parameters as defined by state or local legislation.
Connevans recommend that where possible, attenuating ear plugs are used rather than the type that fully block. This maintains spatial awareness for safety as well as venting the ear - and as a bonus to the employer they last for years as they are non-disposable.
Control of Noise at Work Regulations 2005 which came into force in April 2006
Health & Safety Executive website for information on noise at work regulations
For obvious hygiene issues earplugs are excluded from Connevans extended returns policy and cannot be returned for credit once opened.
Teach children to self-regulate their noise level and create...
Earplugs that are comfortable to wear in bed and effective...
Phonak Serenity Choice is the high-end hearing protection...
At Connevans we are often asked. “Which are your best earplugs,...
Earplug ratings and how they are calculated
SNR = Single Number Rating - is number rating used by countries within the European Union and affiliated countries calculated from Assumed Protection Values according to a method given in Annex D of BS EN ISO 4869-2:1995 "Acoustics - Hearing protectors - Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn". Tests are conducted at independent testing laboratories, using frequencies which are slightly different than those used for the NRR rating. In addition to an overall rating, the SNR further rates protectors in terms of the particular noise environments in which they will be used - H for high-frequency noise environments, M for mid-frequency and L for low-frequency. Note that the HML designation does not refer to noise level, rather the spectrum of the noise. For example, a protector might be designated with SNR 26, H=32, M=23, L=14. The estimated attenuation changes according to the noise spectrum of the environment in which the protector is to be worn. The SNR rating is the result of a lengthy mathematical calculation - it gives us a single-number rating of a hearing protector's attenuation for a specified percentage of the population. The SNR is significantly lower than the average attenuation across all of its test frequencies as the calculation contains correction factors to make it applicable to the broader population. While it is not the perfect real-world measure of attenuation, SNR is a very useful standardized method for describing a hearing protector's attenuation in a single number. For instant if an environment has an a weighted noise measurement of 100dbA then by using an earplug with an SNR rating of 25db it will reduce the noise to 75db, the precautionary action level is 80dbA, where hearing protection has to be offered and audiometric testing training programs implemented.
NRR = Noise Reduction Rating - rating is used in the United States, and is accepted for use in a number of other countries. The NRR is an estimate of the amount of protection achievable by 98% of users in a laboratory setting when hearing protectors are properly fitted. The current range of NRR levels available in the U.S. market extends from 0 to 33 decibels. Published by the U.S. Environmental Protection Agency in 1979, the NRR labeling requirement is a standardized format for all hearing protection products distributed in the U.S. The chart showing mean attenuation values and standard deviations at each of the seven test frequencies (from 125 Hz through 8000 Hz).
We accept the following payment methods
Connevans Limited, Bridge House
1 Nutfield Road, Merstham, Surrey, RH1 3EB
01737 247571 info@connevans.com
